LEDs A, B and C are visible from outside on the server rear. All other
LEDs are only visible if the server cover has been opened.
If the server has been powered off (power plugs must be disconnected) it is
possible to indicate the faulty component by pressing the indicate CSS button.
A - Identification
Status Description
blue on
The server has been highlighted using iRMC S6 web
interface or the ID button on the front panel for easy
identification.
flashing blue
The server has been highlighted for easy
identification using the iRMC S6 (A
VR) with disabled
local VGA output.
B - CSS (Customer Self Service)
Status Description
off No critical event detected (CSS component).
orange on Prefailure event detected (CSS component).
flashing orange CSS component failure detected.
C - GEL (Global Error LED)
Status Description
off No critical event detected (non-CSS component).
orange on Prefailure event detected (non-CSS component).
Appendix A
RX2540 M7 Upgrade and Maintenance Manual 535
To Next Page
Loading...
