Status Description
flashing orange Non-CSS component failure detected.
Possible causes:
–
System is out of the specified temperature range
– Defective sensor
– CPU error
– Error detected by server management software
HDD/SSD activity indicator (5)
Status Description
flashing green Data access in progress.
There are cases in which the HDD/SSD
activity indicator does not flash green during
data access depending on disk connection
configuration. For example, if a PCIe SSD is
not connected to a RAID controller
, the
HDD/SSD activity indicator does not flash
green. Data access can be recognized at
"Access indicator (1)" on page 546.
iRMC-related status signals
ID indicator Global error
indicator
Description
flashing blue off A remote connection has been
established. Local VGA output has been
disabled during the remote session.
flashing blue flashing orange An emergency flash of the iRMC firmware
is in progress.
Appendix A
540 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
