EasyManua.ls Logo

Fujitsu PRIMERGY RX2540 M7

Fujitsu PRIMERGY RX2540 M7
646 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System state Power-
on
indicator
ID
indicator
Time
a Power cord connected - - -
b iRMC boot start, iRMC firmware
restore from iRMC microSD
card (included golden image),
iRMC restart
Record of the following
message on SEL when
completion.
When iRMC version in iRMC
microSD card and iRMC version
of replaced system board is
dif
ferent:
iRMC Firmware %1 has been
successfully restored
from SD card.
The Golden Image has been
successfully restored
from SD card
When iRMC version in iRMC
microSD card and iRMC version
of replaced system board is
same:
Restore of iRMC firmware
%1 omitted because the
already flashed firmware
has the same version
flashing
white
flashing
blue
About
13
minutes
When iRMC
version in
iRMC microSD
card and iRMC
version of
replaced
system board
is same, the
time is
shortened
because iRMC
firmware
update is
skipped.
c iRMC boot complete, BIOS
restore prepare
white on flashing
blue
About 1 minute
d System power (DC) on, BIOS
setting initialize
green on flashing
blue
About
3
minutes
Appendix A
542 Upgrade and Maintenance Manual RX2540 M7

Table of Contents

Related product manuals