GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5-91
Checkpoints
Checkpoints allows for the creation of checkpoints and displays the history of those checkpoints.
Checkpoints are used to indicate when the LOGIQ P9/P7 has been serviced, status has been reset,
and information related to the service performed has been added.
The information on Checkpoints is available to Class C (Service Advanced) and Class M licenses.
To access Checkpoints, select Utility (second page) > Service > Utilities > Checkpoints.
Figure 5-61 Checkpoints
This table shows all the elements available on Checkpoints with descriptions.
Table 5-39 Checkpoints
Element DESCRIPTION
Checkpoints History
Checkpoint Displays the name of the checkpoint.
Service Personnel Displays the ID for the logged in user.
Action Displays the service action.
Comment Displays comment text entered when the checkpoint was created.
Service Checkpoint Displays whether the checkpoint is a service checkpoint or not.
Create Checkpoint
Action
Selects the service action. Value values are
• Scheduled Maintenance
• Unscheduled Maintenance
• Upgrade
• FMI
Service Personnel
ID for the logged in user. Value values are:
• SSO ID: When a Class M key is plugged in, the SSO ID for the logged in user.
• Remote user ID: If there is a remote connection, the remote user ID.
• User ID: If the SSO ID and remote user ID are not available, the user ID for the
logged in user.
• Unknown: The logged in user ID is not available.
Comment Enter comments for creating a checkpoint.
Service Checkpoint Select whether to mark a service checkpoint or not.
Save Saves the information.
To Next Page
Loading...
Need help?
General
