GE LOGIQ P9 Service Manual

GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
5-92 Section 5-11 - Common Service Desktop (R3 only)
To create a check point:
1.) Navigate to Utility (second page) > Service > Utilities > Checkpoints.
2.) Under Create Checkpoints, from Action, select the action.
3.) In Comment, enter notes for the checkpoint.
4.) If this is a checkpoint for service, select Service Checkpoint.
5.) Click Save.
For more information:
• Utilities on page 5-73

GE LOGIQ P9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Elastography	Yes
Connectivity	DICOM, USB, Ethernet, HDMI
Doppler Modes	Color Doppler, Power Doppler
Probes	convex, linear, phased array
Imaging Modes	M-Mode, Color Doppler, Power Doppler
Portability	Cart-based
Applications	Vascular, Cardiac, OB/GYN, Musculoskeletal
Weight	Approx. 80 kg
Touch Panel	10.1-in touchscreen