Function Blocks
CALEVT Calendar Event Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 95
2/07
Properties Group Parameter Index # Parameter Description Value or Selection
Day Day
N/A
User is only prompted for
“Day” when the event_type
is set to “Yearly” or
“Day_of_week” or “Monthly”
Day of the Month or Week
When Event Type = YEARLY,
or MONTHLY, range is 1 to 31
(based on max # of days for
calendar month)
When Event Type = Monthly, 31
means last day of month even
for months with less than 31
days
When Event Type =
Day_of_Week, range is Sunday
to Saturday.
Hour
Hour N/A
Use up/down arrows to
select hour of event
Hour of event; range 0 to 23
Minute
Minute N/A
Use up/down arrows to
select minute of event
Minute of event; range 0 to 59
To Next Page
Loading...
