Honeywell HC900 - Rack Orientation and Mounting

Function Blocks
AGA7TM Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 37
2/07
Properties Group Parameter Index # Parameter Description Value or Selection
QH Multiplier Units Type (see
“UNITS” on
Turbine tab) =
US Metric
MBTU/hr MJ/ hr
MBTU/day MJ/ day
Provides a time period
other than “per hour” or
“per day”.
Enter Value
For example, if “per minute” is
desired, set the unit to “per
hour” and the multiplier to 1/60.
Default = 1.0.
Example
Figure 7 AGA7TM function block example