Function Blocks
CALEVT Calendar Event Function Block
94 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07
EVENT SETPOINT 1 thru 5 tab
Table 28 Calendar Event Setpoint tab configuration parameters
Properties Group Parameter Index # Parameter Description Value or Selection
Setpoint Name
N/A Event Setpoint Name 16 Characters
Type Type of
Event
N/A Type of event can be
configured for different
periods, where the event
repeats at every occurrence
DISABLE – Selected Event is
Disabled
5 day week – The configured
event will occur at the same
time Monday through Friday
7 day week – The configured
event will occur at the same
time Sunday through Saturday
Day of week – The configured
event will occur once a week at
the configured time
Monthly – The configured event
will occur once every month at
configured date and time
Yearly – The configured event
will occur at the specific date
and time
Month Month
N/A
User is only prompted for
“Month” when the
event_type is set to “Yearly”
Months of the year
To Next Page
Loading...
