Honeywell HC900 Reference Guide

Function Blocks
ON/OFF Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 237
2/07
RSP tab
Table 70 ON/OFF RSP tab configuration parameters
Properties
Function
Parameter Index # Parameter Description Value or Selection
Remote Setpoint
Source and Units
Use RSP Input
(EU)
N/A
Use Remote Setpoint in
Engineering Units
Click on radio button to select
Use RSP Input
(%)
Use Remote Setpoint in
Percent
Click on radio button to select
Use LSP2
(EU)
Use Local Setpoint #2 in
Engineering Units
Click on radio button to select

Honeywell HC900 Specifications

General

Series	HC900
Redundancy	Optional
Programming Language	Function Block Diagram, Ladder Logic, Structured Text
Inputs	Analog, Digital
Outputs	Analog, Digital, Relay
Display	Optional
Control	PID, Advanced Control
Power Supply	24V DC or 100-240V AC
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% non-condensing
Communication Protocols	Modbus, Ethernet