Function Blocks
ALMGR Alarm Group Function Block
54 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07
5. Repeat the selection for up to 12 tags for each group.
6. Select a signal in the "Selected Tags" field and click on ALARM DETAILS, and enter Alarm details
in the Dialog Box.
7. Click OK.
You can also select "Alarms" from:
- the EDIT menu on the Hybrid Control Designer Main Menus
- The O/I Worksheet Toolbar button
(when you have an O/I)
- the FBD Worksheet toolbar button
(when you do not have an O/I and do not need to use
Alarm Group logic in the control strategy)
Example
Figure 11 ALMGR Function Block Example
To Next Page
Loading...
