Honeywell HC900 - DI Function Block

Function Blocks
DI Function Block
136 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07
DI Function Block
Description
The DI label stands for Discrete Input.
This block is part of the
I/O Blocks categories.
Function
Discrete input blocks are used to process the digital status of a specific channel of a discrete input module.
Each block requires a module and channel number during configuration. The Input status may be inverted.
If Digital Point is ON, then OUT = ON.
Output
OUT
= Digital Signal
Block properties
Double click on the function block to access the function block properties dialog box.