Honeywell HC900 - Table 104 Auxiliary Output Labels Configuration Parameters

Function Blocks
SPS Setpoint Scheduler Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 357
2/07
AUXILIARY OUTPUT LABELS tab
It lets you set up labels for Auxiliary Outputs in the Setpoint Schedule to be displayed on the Operator Interface.
Enter Label names, Units(eu), and Decimal places
Table 104 Auxiliary Output labels configuration parameters
Parameter Index # Parameter Description Value or Selection
AUX
AUX1 thru AUX8
Label
N/A Label name for Operator Interface 8 characters max.
Units
N/A Units for Operator Interface 4 characters max.
Decimal
Places
N/A
Decimal places for operator
Interface
0 - 4