Honeywell HC900 - PDR Peer Data Read Function Block

Function Blocks
PDR Peer Data Read Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 259
2/07
PDR Peer Data Read Function Block
Description
The PDR label stands for Peer Data Read.
This block is part of the
Communications categories..
Function
A Peer Data Exchange block that expands the Read capability of the PDE function block to 16 additional
points.
Multiple blocks may be connected to the same PDE function block.
The PDW Write block has 16 outputs. The Peer Data Exchange destination for each of the 16 input can be
configured.
Inputs
RD1 through RD16
- Values to be written to the selected peer controller
Outputs
None
Block Properties
Double click on the function block to access the function block properties.