Honeywell HC900 - Table 76 PDE Write Tab Configuration Parameters

Function Blocks
PDE Peer Data Exchange Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 257
2/07
WRITE tab
Table 76 PDE Write tab configuration parameters
Parameter Index # Parameter Description Value or Selection
Write
Variable
N/A
Activates the WR1
through WR4 pins for
writes.
Click on selection box next to the pin
number.
Variable
Number
N/A
Variable number that
appears on the Tag
Information Report.
See "Tag Information
Example".
Enter a variable number from the report.
You can also use the "Find a Signal
tag" procedure to find the variable
number.