Honeywell HC900 - RSW Rotary Switch Function Block

Function Blocks
RSW Rotary Switch Function Block
326 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07
RSW Rotary Switch Function Block
Description
The RSW label stands for Rotary Switch.
This block is part of the
Signal Selectors category.
Function
The single output value is selected from up to 8 analog inputs by a number of from 1 to 8.
ATTENTION
Numbers less than one select input one as the output. Numbers greater than eight select Input
8 as the output.
Input
IN1
= Input 1
IN2 = Input 2
IN3 = Input 3
IN4 = Input 4
IN5 = Input 5
IN6 = Input 6
IN7 = Input 7
IN8 = Input 8
SEL = Selects Input # to Output
Output
OUT
= Output Value
Block properties
Double click on the function block to access the function block properties dialog box.