Honeywell HC900 - Table 105 Event Labels Configuration Parameters

Function Blocks
SPS Setpoint Scheduler Function Block
358 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07
EVENT LABELS tab
It lets you set up labels for Events in the Setpoint Schedule to be displayed on the Operator Interface. Enter a label
title in each field
Table 105 Event labels configuration parameters
Parameter Index # Parameter Description Value or Selection
EVENT
EVENT1 thru
EVENT 8
Label
N/A Label name for Operator Interface 8 characters max.
Units
N/A Units for Operator Interface 4 characters max.