Honeywell HC900 - Table 67 off Delay Timer Configuration Parameters

Function Blocks
OFDT Off Delay Timer Function Block
Revision 11 HC900 Hybrid Control Designer Function Block Reference Guide 229
2/07
Block properties
Double click on the function block to access the function block properties dialog box.
Configuration parameters
Table 67 Off delay timer configuration parameters
Properties Group Parameter Index # Parameter Description Value or Selection
Time Delay Time delay
0
Delay Time - specifies the
amount of time the OFF state
logic output will occur after an
ON to OFF transition of the Reset
input.
0.1 sec, 0 to 99999.9
Enter as 0.1 to 99999 in
0.1 increments.