HP E4418B - Page 144

prog.book : ch2meas.fm 7 Mon Feb 15 09:24:37 1999
MEASurement Instructions
CONFigure[1|2]?
HP E4418B/E4419B Programming Guide 2-7
Example
Reset Condition
On reset,
• the command function is set to :POWer:AC.
• the expected power level is set to +20 dBm.
• the resolution is set to 3.
• the source list
■ on the HP E4418B is set to channel A on both windows.
■ on the HP E4419B is set to channel A on the upper window
and channel B on the lower window.
CONF2? This command queries the current
configuration of the lower window.