prog.book : ch5disp.fm 7 Mon Feb 15 09:24:37 1999
DISPlay Subsystem
DISPlay[:WINDow[1|2]]:FORMat <character_data>
HP E4418B/E4419B Programming Guide 5-7
DISPlay[:WINDow[1|2]]:FORMat <character_data>
This command is used to select the format, either analog or digital, of the
selected window.
Syntax
Parameters
Example
Reset Condition
On reset, the HP E4418B upper window is DIGital and the lower
window ANALog. For the HP E4419B the defaults for the upper and lower
windows are DIGital.
Query
DISPlay:[WINDow[1|2]]:FORMat?
The query returns the current format of the selected window, either ANAL
or DIG.
Item Description/Default Range of Values
character_data Character data for the window format.
For the HP E4418B the default for the
upper window is DIGital and ANALog
for the lower window. For the
HP E4419B the defaults for the upper
and lower windows are DIGital.
DIGital
ANALog
DEF
DISP:WIND2:FORM DIG This command sets the lower
window to a digital display.
:FORM
DISP
character_data
Space
?
DEF
:WIND
1
2
To Next Page
Loading...
Need help?
General
