HP E4418B - Calculate[1|2]:Limit:state <Boolean

prog.book : ch3calc.fm 17 Mon Feb 15 09:24:37 1999
CALCulate Subsystem
CALCulate[1|2]:LIMit:STATe <Boolean>
HP E4418B/E4419B Programming Guide 3-17
CALCulate[1|2]:LIMit:STATe <Boolean>
This command is used to enable and disable the test limits for the
specified window.
Syntax
Example
Reset Condition
On reset, limit checking is disabled.
Query
CALCulate[1|2]:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the
limits testing feature for the specified window.
• 1 is returned when limits testing is enabled.
• 0 is returned when limits testing is disabled.
Query Example
CALC2:LIM:STAT 1 This command enables the limit
checking function for the lower
window.
CALC1:LIM:STAT? This command queries whether
the limit checking function for the
upper window is on or off.
CALC
1
2
0|OFF
1|ON
Space
?
:LIM
:STAT