prog.book : ch7mem.fm 6 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:CATalog:STATe?
7-6 HP E4418B/E4419B Programming Guide
MEMory:CATalog:STATe?
This command is used to list the save/recall registers.
The power meter returns the data in the form of two numeric parameters
and as many strings as there are save/recall registers.
<numeric_value>,<numeric_value>{,<string>}
• The first numeric parameter indicates the amount of memory, in
bytes, used for the storage of registers.
• The second parameter indicates the memory, in bytes, available
for the storage of registers.
• Each string parameter returned indicates the name, type and size
of a save/recall register:
■ <string>,<type>,<size>
◆ <string> indicates the name of the save/recall register.
◆ <type> indicates STAT for save/recall register.
◆ <size> indicates the size of the save/recall register in bytes.
For example, a sample of a response may look like:
0,16190,"State0,STAT,0","State1,STAT,0" .........
Syntax
Example
MEM:CAT:STAT? This command queries the list of
save/recall registers.
MEM
:CAT
:STAT
?
To Next Page
Loading...
Need help?
General
