prog.book : ch10stat.fm 15 Mon Feb 15 09:24:37 1999
STATus Subsystem
STATus:OPERation:SENSe[:SUMMary]
HP E4418B/E4419B Programming Guide 10-15
STATus:OPERation:SENSe[:SUMMary]
The operation status sense summary register set contains information on
the status of the power sensors.
The following bits in these registers are used by the power meter:
These bits are set when the power meter is reading data from the
HP E-series power sensor EEPROM.
These bits are cleared when the power meter is not reading data from the
HP E-series power sensor EEPROM.
Syntax
Bit
Number
Decimal
Weight
Definition
0 - Not used
1 2 Channel A SENSe Status
2 4 Channel B SENSe Status (HP E4419B only)
3-15 - Not used
STAT
:OPER
:SENS
:SUMM
To Next Page
Loading...
Need help?
General
