HP E4418B - Memory:table Node

prog.book : ch7mem.fm 21 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:TABLe Node
HP E4418B/E4419B Programming Guide 7-21
MEMory:TABLe Node
This node is used to define a sensor calibration table, or a frequency
dependent offset table, and to write to and read data from it.
The commands associated with this node are:
MEMory:TABLe:FREQuency <numeric_value>{,<numeric_value>}
MEMory:TABLe:FREQuency:POINts?
MEMory:TABLe:GAIN[:MAGNitude]
<numeric_value>{,<numeric_value>}
MEMory:TABLe:GAIN[:MAGNitude]:POINts?
MEMory:TABLe:MOVE <string>,<string>
MEMory:TABLe:SELect <string>