prog.book : ch7mem.fm 30 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:TABLe:SELect <string>
7-30 HP E4418B/E4419B Programming Guide
MEMory:TABLe:SELect <string>
This command is used to activate either a sensor calibration table, or a
frequency dependent offset table. A table must be activated before any
operation can be performed on it.
Syntax
Parameters
Example
Query
MEMory:TABLe:SELect?
The query returns the name of the currently selected table.
Item Description/Default Range of Values
string A string detailing the table name. A
maximum of 12 characters can be used.
A to Z (uppercase)
a to z (lowercase)
0 - 9
_ (underscore)
MEM:TABL:SEL "Sensor1" This command selects a sensor
calibration table named
“Sensor1”.
MEM
:TABL
:SEL
string
?
Space
To Next Page
Loading...
Need help?
General
