HP E4418B Programming Guide

prog.book : ch11syst.fm 7 Mon Feb 15 09:24:37 1999
SYSTem Subsystem
SYSTem:COMMunicate:SERial[:RECeive]:BAUD <numeric_value>
HP E4418B/E4419B Programming Guide 11-7
SYSTem:COMMunicate:SERial[:RECeive]:BAUD <numeric_value>
This command sets the baud rate for both the receiver and the
transmitter. The baud rate for the receiver and transmitter are tied
together and can either be set by this command or the equivalent
transmitter command :TRANsmit:BAUD.
Syntax
Parameters
Example
Reset Condition
On reset, the baud rate is unaffected
Item Description/Default Range of Values
numeric_value A numeric value for the baud rate. The
default value, DEF, is 9600. The value for
MIN is 50. The value for MAX is 115200.
50, 75, 110, 150,
300, 1200, 1800,
2000, 2400, 3600,
4800, 7200, 9600,
19200, 38400,
57600, 115200
DEF
MIN
MAX
SYST:COMM:SER:REC:BAUD 38400 This command sets the receiver
and transmitter baud rate to
38400.
SYST
:COMM
:SER
:REC
:BAUD
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space

HP E4418B Specifications

General

Brand	HP
Model	E4418B
Category	Measuring Instruments
Language	English