prog.book : ch7mem.fm 25 Mon Feb 15 09:24:37 1999
MEMory Subsystem
MEMory:TABLe:FREQuency:POINts?
HP E4418B/E4419B Programming Guide 7-25
MEMory:TABLe:FREQuency:POINts?
This query returns the number of frequency points for the table currently
selected. The response format is <NRf>. If no frequency values have been
set, this command returns 0. If no table is selected, this command returns
NAN.
Syntax
Example
MEM:TABL:FREQ:POIN? This command queries the number
of frequency points in the current
table.
MEM
:TABL
:POIN
?
:FREQ
To Next Page
Loading...
