prog.book : ch9sens.fm 4 Mon Feb 15 09:24:37 1999
SENSe Subsystem
[SENSe[1]]|SENSe2:AVERage Node
9-4 HP E4418B/E4419B Programming Guide
[SENSe[1]]|SENSe2:AVERage Node
This node controls averaging which is used to improve the measurement
accuracy. The AVERage subsystem combines successive measurements to
produce a new composite result.
The commands associated with this node are:
[SENSe[1]]|SENSe2:AVERage:COUNt <numeric_value>
[SENSe[1]]|SENSe2:AVERage:COUNt:AUTO <Boolean>
[SENSe[1]]|SENSe2:AVERage[:STATe] <Boolean>
To Next Page
Loading...
