HP E4418B Programming Guide

prog.book : ch6form.fm 3 Mon Feb 15 09:24:37 1999
FORMat Subsystem
FORMat[:READings]:BORDer NORMal|SWAPped
HP E4418B/E4419B Programming Guide 6-3
FORMat[:READings]:BORDer NORMal|SWAPped
This command is used to control whether the binary data is transferred in
normal or swapped Byte ORDer. It is only used when
FORMat[:READings][:DATA] is set to REAL.
Syntax
Example
Reset Condition
On reset, this value is set to NORMal.
Query
FORMat[:READings]:BORDer?
The query returns the current setting of the byte order. The format of the
response is <character_data>.
Query Example
FORM:BORD SWAP This command sets the byte order
to swapped.
FORM:BORD? This command queries the
current byte order setting.
FORM
:READ :BORD
NORM
SWAP
Space
?

HP E4418B Specifications

General

Brand	HP
Model	E4418B
Category	Measuring Instruments
Language	English