prog.book : ch11syst.fm 24 Mon Feb 15 09:24:37 1999
SYSTem Subsystem
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
11-24 HP E4418B/E4419B Programming Guide
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
This command sets the number of stop bits expected by the receiver on
received data and the number of stop bits included by the transmitter in
transmitted data.
Syntax
Parameters
Example
Reset Condition
On reset, the number of stop bits is unaffected.
Query
SYSTem:COMMunicate:SERial:TRANsmit:SBITs?
The query returns the current setting of the transmit/receive stop bits.
Item Description/Default
Range of
Values
numeric_value A numeric value for the number of stop
bits.
1 or 2
SYST:COMM:SER:TRAN:SBIT 2 This command sets the number of
stop bits for the transmitter and
receiver to 2.
SYST
:COMM
:SER
:TRAN
:SBIT
Space
numeric_value
?
To Next Page
Loading...
Need help?
General
