prog.book : ch3calc.fm 25 Mon Feb 15 09:24:37 1999
CALCulate Subsystem
The CALCulate[1|2]:RELative Node
HP E4418B/E4419B Programming Guide 3-25
The CALCulate[1|2]:RELative Node
This node contains commands which allow you to compare the
measurement signal to a reference value.
Within the CALCulate block the relative value is applied to the
measurement signal after any math calculations and display offsets have
been applied.
The commands associated with this node are:
CALCulate[1|2]:RELative[:MAGNitude]:AUTO <Boolean>|ONCE
CALCulate[1|2]:RELative:STATe <Boolean>
To Next Page
Loading...
Need help?
General
