prog.book : ch10stat.fm 19 Mon Feb 15 09:24:37 1999
STATus Subsystem
Questionable Register Sets
HP E4418B/E4419B Programming Guide 10-19
Questionable Register Sets
The Questionable Register Sets contain information which gives an
indication of the quality of the data produced by the power meter. The
contents of the individual registers in these register sets may be accessed
by appending the commands listed in “Status Register Set Commands”.
The following command descriptions detail the SCPI register you require
to control but do not detail the Register Set commands.
The three Questionable Register Sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
To Next Page
Loading...
Need help?
General
