HP E4418B - Page 226

prog.book : ch3calc.fm 27 Mon Feb 15 09:24:37 1999
CALCulate Subsystem
CALCulate[1|2]:RELative[:MAGNitude]:AUTO <Boolean>|ONCE
HP E4418B/E4419B Programming Guide 3-27
Query
CALCulate[1|2]:RELative[:MAGNitude]:AUTO?
The query always returns OFF.
Error Message
If CALCulate:RELative[:MAGNitude]:AUTO is set to ONCE while
SENSe:SPEed is set to 200, the error -221, “Settings Conflict” occurs.
If this command is set to ON the error -224, “Illegal parameter value”
occurs.