prog.book : ch9sens.fm 38 Mon Feb 15 09:24:37 1999
SENSe Subsystem
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed] <numeric_value>
9-38 HP E4418B/E4419B Programming Guide
Example
Reset Condition
On reset, the frequency is set to 50 MHz (DEF).
Query
[SENSe[1]]|SENSe2:FREQuency[:CW|:FIXed]? [MIN|MAX]
The query returns the current frequency setting or the values associated
with MIN and MAX. The units in which the results are returned are Hz.
Query Example
FREQ 500kHz This command enters a channel A
frequency of 500 kHz.
SENS2:FREQ? This command queries the
channel B frequency setting.
To Next Page
Loading...
