HP E4418B Programming Guide

prog.book : ch10stat.fm 5 Mon Feb 15 09:24:37 1999
STATus Subsystem
Status Register Set Commands
HP E4418B/E4419B Programming Guide 10-5
:ENABle <NRf>|<non-decimal numeric>
This command is used to set the Enable Register of the particular SCPI
Register Set you require to control. The parameter value, when rounded to
an integer and expressed in base 2 has it’s first 15 bits written into the
Enable Register of the SCPI Register Set concerned. The last bit (bit 15) is
always set to 0.
Syntax
Parameters
Query
:ENABle?
The query returns a 15 bit decimal-weighted number representing the
contents of the Enable Register of the SCPI Register Set being queried.
The format of the return is <NR1> in the range of 0 to 32767 (2
15
-1).
Type Description Range of Values
NRf The value used to set the
Enable Register.
0 to 2
16
-1
non-decimal numeric
:ENAB
NRf
non-decimal numeric
?
space

HP E4418B Specifications

General

Brand	HP
Model	E4418B
Category	Measuring Instruments
Language	English