prog.book : ch11syst.fm 17 Mon Feb 15 09:24:37 1999
SYSTem Subsystem
SYSTem:COMMunicate:SERial:TRANsmit:BAUD <numeric_value>
HP E4418B/E4419B Programming Guide 11-17
Query
SYSTem:COMMunicate:SERial:TRANsmit:BAUD? MIN|MAX
The query returns the current setting of the transmit/receive baud rate or
the values associated with MIN and MAX.
Query Example
Error Message
If the baud rate is not in the range of values shown in the parameter table,
then the error message -224, “Illegal parameter value” will occur.
SYST:COMM:SER:TRAN:BAUD? This command queries the setting
of the transmit/ receive baud rate.
To Next Page
Loading...
