prog.book : ch13unit.fm 7 Mon Feb 15 09:24:37 1999
UNIT Subsystem
UNIT[1|2]:POWer:RATio <ratio_unit>
HP E4418B/E4419B Programming Guide 13-7
Query
UNIT[1|2]:POWer:RATio?
The query returns the current setting of the ratio measurement units.
Query Example
Error Message
If this command is used with an HP E4418B, error -113, “Undefined
header” occurs.
UNIT2:POW:RAT? This command queries which ratio
measurement units are being used
on the lower window. It also
queries the default units for any
relevant SENSe2 command.
To Next Page
Loading...
