HPE FlexNetwork MSR Series User Manual

17
Figure 368 Adding an ISP domain
Table 160 Configuration items
Item Description
ISP Domain Specify the name of the ISP domain.
Authentication
Methods
Primary
Select the primary authentication method for PPP users.
• HWTACACS—HWTACACS authentication, which uses the
HWTACACS scheme system.
• Local—Local authentication.
• None—No authentication. All users are trusted and no authentication
is performed.
• RADIUS—RADIUS authentication, which uses the RADIUS scheme
system.
• If you do not select any authentication method, the default
authentication method of the ISP domain will be used. The default is
local authentication.
Backup
Specify whether to use local authentication as the backup authentication
method. This item is available only when you select HWTACACS or
RADIUS as the primary authentication method.
Authorization
Methods
Primary
Select the primary authorization method for PPP users.
• HWTACACS—HWTACACS authorization, which uses the
HWTACACS scheme system.
• Local—Local authorization.
• None—No authorization. The access device does not perform
authorization for PPP users. After passing authentication, PPP users
can directly access the network.
• RADIUS—RADIUS authorization, which uses the RADIUS scheme
system.
• If you do not select any authorization method, the default
authorization method of the ISP domain will be used. The default is
local authorization.
Backup
Specify whether to use local authorization as the backup authorization
method. This item is available only when you select HWTACACS or
RADIUS as the primary authorization method.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English