HPE FlexNetwork MSR Series User Manual

18
Item Description
Accounting
Methods
Accounting
Optional
Specify whether to enable the accounting optional function.
For an online user, with the accounting optional function disabled, if no
accounting server is available or communication with the current
accounting server fails, the user will be disconnected. However, with the
accounting optional function enabled, the user can still use the network
resources in such case, but the system will not send the accounting
information of the user to the accounting server any more.
Primary
Select the primary accounting method for PPP users.
• HWTACACS—HWTACACS accounting, which uses the HWTACACS
scheme system.
• Local—Local accounting.
• None—No accounting. The system does not perform accounting for
the users.
• RADIUS—RADIUS accounting, which uses the RADIUS scheme
system.
• If you do not select any accounting method, the default accounting
method of the ISP domain will be used. The default is local
accounting.
Backup
Specify whether to use local accounting as the backup accounting method.
This item is available only when you select HWTACACS or RADIUS as the
primary accounting method.
Max. Number of Users
Specify the maximum number of users the ISP domain can accommodate.
If you do not specify the maximum number, the system will not limit the
number of users of the ISP domain.
Because users might compete for resources, setting a proper limit on the
number of users of an ISP domain helps guarantee performance for the
users of the ISP domain.
Figure 369 Adding an address pool
Table 161 Configuration items
Item Description
ISP Domain Select the ISP domain for the IP address pool to be created.
IP Address Pool Number
Specify the number of the IP address pool.
If you set the IP address pool number to 1, the name of the IP address pool
is pool1.
Start IP
Specify the start IP address and end IP address of the IP address pool.
The number of addresses between the start IP address and end IP
address must not exceed 1024. If you specify only the start IP address, the
IP address pool will contain only one IP address, namely, the start IP
address.
End IP

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English