HPE FlexNetwork MSR Series User Manual

27
Figure 382 Configuring interface Ethernet 0/0
2. Configure an IP address for interface Ethernet 0/1, the physical interface of the tunnel:
a. Click the icon for interface Ethernet 0/1.
b. Select Manual for Connect Mode.
c. Enter IP address 1.1.1.1.
d. Select IP mask 24 (255.255.255.0).
e. Click Apply.
Figure 383 Configuring interface Ethernet 0/1
3. Create a GRE tunnel:

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English