39
ensure the security of data transmission, SSL VPN uses the SSL encryption technology to encrypt
service data.
1. Select VPN > SSL VPN > Resource Management > TCP Application from the navigation
tree.
The Remote Access Service page appears.
Figure 396 Remote access service resource list
2. Click Add to enter the page for adding a remote access service.
Figure 397 Adding a remote access service
3. Configure the remote access service as described in Table 167.
4. Click Apply.
Table 167 Configuration items
Item Description
Resource Name
Enter a name for the remote access service resource.
The resource name must be unique in the SSL VPN system. Resources are
uniquely identified by their names.
IMPORTANT:
If you do not configure the command for Command, H3C recommends including the
resource type, local address, and local port in the resource name so that users can
view the desired information after they log in to the SSL VPN system.
Remote Host
Specify the host name or IP address of the remote host that provides the remote
access service.
Remote Port Specify the port number that the remote host uses for the remote access service.
Local Host
Specify a loopback address or a character string that represents a loopback
address.
Local Port
Specify the port number that the local host uses for the remote access service. H3C
recommends using a port number greater than 1024 that is rarely used.
To Next Page
Loading...
