HPE FlexNetwork MSR Series

315
Configuring the SIP trunk device
# Enable the SIP trunk function.
1. Select Voice Management > SIP Trunk Management > Service Configuration from the
navigation tree.
Figure 706 Configuring services
2. Select Enable for SIP Trunk Function.
3. Click Apply.
# Create SIP server group 1. Add a SIP server into the server group: the ID and the IPv4 address of
the server are 1 and 10.1.1.2 respectively.
4. Select Voice Management > Call Connection > SIP Server Group Management from the
navigation tree and click Add.
Figure 707 Configuring server group
5. Enter 1 for Server Group ID.
6. Enter 1 for Server ID.
7. Enter 10.1.1.2 for Server Address.
8. Click Add the Server.