3. Operation of CON Related Controllers
111
[Startup screen setting]
Setting can be established for the window shown in the screen first after the power is turned on.
Also, show / hide can be selected for the icons of Position edit guide, I/O control guide and Easy
setting in Menu 1 screen.
Touch [Startup screen setting].
1) Guide Icon Display Select
[Main menu screen (with guide)]
: Displays the guide icons
(Note 1)
.
[Main menu screen (without guide)]
: Displays no guide icon
(Note 1)
.
Touch [OK].
(Note1) Position edit guide Icon, I/O control guide Icon and Easy setting Icon
Menu 1 screen with guide icons
(Note 1)
hidden
2) Initial Screen Select at Startup
Select a screen from those below for the screen shown
first after the power is turned on.
[Monitor screen]
[Position edit screen]
[Parameter edit screen]
[Test run screen]
[Information screen]
Touch either one to select and touch [OK].
For the servo press type controllers;
[Prs Program Edit Window] should be shown instead of
[Position Edit Window].
To Next Page
Loading...