5. Operation of MEC Related Controllers
266
The menu screen appears.
[Refer to 5.6, “MEC Menu Selection.”]
[Refer to 5.16, “Monitor.”]
5.3 Initial Screen
When the power is turned on, the IAI logo is displayed for approx. 1 second on the operation
display screen of the touch panel teaching pendant, after which version information is
displayed.
On TB-02D pendants, this
screen is displayed when
the enable function
parameter of the controller
is set to “Disable.”
On TB-02 pendants, this
screen is displayed when
the enable function
parameter of the controller
is set to “Enable.”
* The same items can be set on the
automatic monitor setting screen
accessible from the environment
setting screen of the controller.
To Next Page
Loading...