3. Operation of CON Related Controllers
118
3.20.1 Setting Operation for Max. Acceleration/Deceleration for Indicated
Transported Load and Velocity
1) Basic Information Settings
Set the model code, lead, stroke, actuator posture and the payload of the applicable
actuator.
Touch [Position edit] button.
Touch [Tuning setting].
Tuning setting screen opens.
Touch ▼ and ▲ to select the applicable series, model
type, lead (mm). For the stroke, numeric keys will appear if
touching it. Input a value on the numeric keys.
Select the actuator posture from either horizontal or
vertical.
Touch [OK].
Touch the number input box from Load No. 0 to No. 3.
Numeric keys appear. Set the payload.
Touch [OK] to return to Position edit screen.
To Next Page
Loading...