6. Operation of ELECYLINDER
327
6.3 Initial Screen
When the power is turned on, the IAI logo is displayed and then the version information is
displayed.
IAI logo will be displayed in the screen for a few seconds.
Versions of the teaching and core will be displayed.
[Displayed only in multiple-unit connection]
If multiple units are connected, the axis selection screen
appears.
Select an axis to be operated with the touch panel teaching
pendant. [Refer to 6.4 Change Operating Axis].
The number of axis to be operated and the type of controller
will be displayed. (EC: ELECYLINDER)
The Menu 1 screen appears.
To Next Page
Loading...