IAI TB-02 - Monitor Screen; Monitor Main Screen

3. Operation of CON Related Controllers
43
3.9.1 Monitor Screen
3.9.1.1 Monitor Main Screen
[Network Monitor] button should be displayed for the
network type single axis controllers.
Touch [I/O monitor] and the I/O monitor screen will be displayed. [Refer to 3.9.1.2]
Touch [Data monitor] and the data monitor screen will be displayed. [Refer to 3.9.1.3]
Touch [Input signal] and the term explanation screen for input signals will be displayed. [Refer
to 3.9.1.4]
Touch [Output Signal] and the term explanation screen for output signals will be displayed.
[Refer to 3.9.1.4]
Touch [Production info] and the manufacturing information screen will be displayed. [Refer to
3.9.17]
Touch [Maint.] and the maintenance information screen will be displayed. [Refer to 3.9.2]
Touch [Time] and the controller clock setting screen will be displayed. [Refer to 3.9.3]
Touch [Disp. change cur.] and the value of current will be displayed.
Touch [Cur. ratio disp. change] and the current ratio will be displayed.
For Pulse Train Control Type Controllers
Touch [Disp. change pulse] and the current position is shown in Pls and the current velocity in
Pls/s.
Touch [mm display change] and the current position is shown in mm and the current velocity in
mm/s.
For Network Type Single Axis Controllers
Touch [Network Monitor] and the network data monitor window opens. [Refer to 3.9.1.5]