3. Operation of CON Related Controllers
27
3. Operation of CON Related Controllers
CON related controllers: ERC2, ERC3, RCP6S, RCM-P6□C, ACON, PCON, SCON, DCON,
RACON, RPCON, MCON, MSCON and RCON-PC/PCF/AC/DC
3.1 Displayed Language Change
The language can be changed by following the steps below.
For the operations after the language change, please refer to the instruction manual written in
each language.
● Display change from English to Japanese
(1) Touch [Menu2] in Menu1. (2) Touch [Environment Setting] in Menu2.
(3) Touch [Japanese]. (4) Touch [上記設定を書き込み].
(Note)
Skipping to another window without touching
上記設定を書き込み
will allow setting to go back to that
before changed.
● Display change from Japanese to English
(1) Touch [メニュー2] in メニュー1. (2) Touch [環境設定] in メニュー2.
(3)
Touch [英語]. (4) Touch [Write the above setting].
(Note)
Skipping to another window without touching Write the above setting will allow setting to go back to
that before changed.
To Next Page
Loading...