IAI TB-02 - Operation of ELECYLINDER; Displayed Language Change

6. Operation of ELECYLINDER
323
6. Operation of ELECYLINDER
6.1 Displayed Language Change
The language can be changed by following the steps below.
For the operations after the language change, please refer to the instruction manual written in
each language.
● Display change from English to Japanese
(1) Touch [Menu2] in Menu1. (2) Touch [Env. Set.] in Menu2.
(3)
Touch [Japanese]. (4) Touch [上記設定を書き込み].
(Note) Skipping to another window without touching [
上記設定を書き込み ] will allow setting to go
back to that before changed.
● Display change from Japanese to English
(1) Touch [メニュー2 へ] in メニュー1. (2) Touch [環境設定] in メニュー2.
(3) Touch [英語]. (4) Touch [Write the above setting].
(Note) Skipping to another window without touching [Write the above setting] will allow setting to
go back to that before changed.