2. Connection
26
2.3 Safety Category compliance
It is capable to comply with Safety Categories by connecting TB-02 and TP adapter
(RCB-LB-TGS) for p
osition controller and establishing wiring for safety circuit.
Join the Safety Category applicable cable CB-TB1-GC002 to the TB-02 standard cable.
Note: When not connecting the TB-02, always insert a dummy plug DP-4S into the
position controller’s TP adapter.
The applicable category
level differs depending on
the controllers.
Controlle
Position controller TP adapter
RCB-LB-TGS
Controller adaptor
Connection cable
Type: CB-CON-LB□□□
Safety circuit
Standard Cable (5m)
Dummy plug
DP-4S
Safety Category compatible cable
CB-TB1-GC002
Minimum Bending Radius 48mm
Touch Panel
Teaching
TB-02
Minimum Bending Radius 36mm
To Next Page
Loading...