IAI TB-02 - Data Monitor Screen; IO Monitor Screen

3. Operation of CON Related Controllers
45
3.9.1.2 I/O Monitor Screen
Touch [Monitor main] and the monitor main screen will be displayed. [Refer to 3.9.1.1]
Touch [Data monitor] and the data monitor screen will be displayed. [Refer to 3.9.1.3]
[Displayed Items]
 Input port The status of each input port is shown. ON is lit. OFF is unlit.
 Outp. port The status of each output port is shown. ON is lit. OFF is unlit.
The items and buttons to be shown will differ depending on the controller models.
The signal names to be shown will also differ depending on the controller models and operation
patterns.
3.9.1.3 Data Monitor Screen
Touch [Monitor main] and the monitor main screen will be displayed. [Refer to 3.9.1.1]
Touch [I/O monitor] and the I/O monitor screen will be displayed. [Refer to 3.9.1.2]
Touch [Disp. change cur.] and the value of current will be displayed.
Touch [Cur. ratio disp. change] and the current ratio will be displayed.
For Pulse Train Control Type Controllers
Touch [Disp. change pulse] and the current position is shown in Pls and the current velocity in
Pls/s.
Touch [mm display change] and the current position is shown in mm and the current velocity in
mm/s.